|
|
|
| |
How it works: |
|
|
| • |
The profile is placed against the zero line of the machine bed. |
|
| • |
The drill head moves rapidly on a carriage and detects the profile to find the zero position. |
|
| • |
It is then ready to drill the pre-programmed hole sequence. |
|
| • |
Each time a hole is drilled the profile is clamped by an hydraulic clamp. |
|
| • |
The drill moves in X-Y-Z axes. |
|
| • |
When both sides of a beam need to be drilled the beam must be turned manually. |
|
| |
A
sk for details. |
|
|
|
|
|
|
| |
Specifications: |
|
|
| |
I-Beam Drill Line |
|
| |
Technical
Data: |
|
Section volume
|
|
1,100x1,100mm max.
80x80mm min. |
|
| |
|
|
Bar length |
|
12.2m (40 feet) |
|
| |
|
|
Drilling capacity
|
|
1 drill head with tool changer.
> Auto tool change.
> Drill diameter 40+ (to be advised).
> Program controlled.
> Spindle rotation speed with continuous variation - to give optimum speed for the diameter of the drill. |
|
|
I-Beam Drill Line