|
|
|
|
|
| Optional Equipment: Multi Range - |
|
|
|
|
|
|
|
|
| |
 |
|
|
|
|
| |
Minimum Deform Stripper
Assembly
Minumum deform stripper assembly to give minimum deformation while punching close pitch holes in flat bar.
|
|
|
|
|
|
|
|
|
|
| |
 |
|
|
|
|
| |
Quick Tool Change
Quck change punch holder. Only needs to turn the punch holder by 90º to lock in position.
|
|
|
|
|
|
|
|
|
|
| |
 |
|
|
|
|
| |
Large Hole Attachment
Large hole/slot attachment for diameters from 38 up to 110mm. Also available for diameters up to 160 or 225mm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
 |
|
|
|
|
| |
Channel/Beam Web Bolster
Specially designed web bolster for punching in the web of channel or beam. Bolsters for special profiles available on application.
|
|
|
|
|
|
|
|
|
|
| |
 |
|
|
|
|
| |
'Super-Quick' Tool Change
Spring and ball bearings lock/un-lock the tool in postion with 90º hand turn. No spanners or wrenches required.
|
|
|
|
|
|
|
|
|
|
| |
 |
|
|
|
|
| |
Tube Notch Unit
For 90º connection with tubes. Available for outside diameters up to 165mm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
 |
|
|
|
|
| |
Sheet Bending Unit
Sheet bending unit with multi-vee block (with 10, 20, 24 & 40mm wide V-openings, all 85º).
|
|
|
|
|
|
|
|
|
|
| |
 |
|
|
|
|
| |
Louvre Punch Unit
Special punch unit for punching ventilation applications.
|
|
|
|
|
|
|
|
|
|
| |
 |
|
|
|
|
| |
Bar Bending Unit
For bending material up to max. 22mm thickness. With single-vee block, 76mm with V at 85º.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
 |
|
|
|
|
| |
Twin Hole Unit
Twin hole variable pitch unit. Punches 2 holes up to 29mm dia.
|
|
|
|
|
|
|
|
|
|
| |
 |
|
|
|
|
| |
Swan Neck Bolster
For web and flange punching up to 32mm dia. in 300mm max. channel and 'I'beam.
|
|
|
|
|
|
|
|
|
|
| |
 |
|
|
|
|
| |
Touch & Cut Ruled Length Stop
The Touch & Cut ruled length stop (one metre) can be used for the angle-cutting, section-cutting and shear station. 2 or 3 metre lengths available.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
 |
|
|
|
|
| |
90º V-Notch
For triangular notching purposes, the standard rectangular notch station can be replaced by a V-notch unit. The V-notch unit is available in various angles up to 90º.
|
|
|
|
|
|
|
|
|
|
| |
 |
|
|
|
|
| |
Blades For Cropping Channel
Solid blades for cropping UPN-profiles. Blades available for many different and special profiles and/or with interchangeable insert blades.
|
|
|
|
|
|
|
^ Top ^ |
|
|
|
|
|
Multi Range
