Haco Kingsland

Weybourne Road, Sheringham,
Norfolk, NR26 8HE, England.

Tel: +44 (0) 1263 822 153
Fax: +44 (0) 1263 825 667

Contact us!

 Well engineered, robust steelworkers, built for a long working life

The Compact 50, 65 and 80 are universal and compact hydraulic steelworkers with 5 workstations, developed for production purposes with maximum efficiency. The Compact machines are designed and manufactured using our long experience in manufacturing of hydraulic steelworkers.

Comprehensive safety guards are fitted as standard on all work stations. Free standing on a suitable floor, they just require electrical connection to be ready for work.

Shielded foot control                                                                                                                                                                        
The hydraulic circuit is activated by a shielded foot-pedal. The inch mode on each workstation enables the correct work piece positioning and tool alignment. Limit switches allow accurate adjustment of the stroke length for maximum efficiency. Stroke with automatic return.

Angle cutting
On the angle cutting station, angle iron can be cut on every angle from 45° up to 90°, both internal and external, without any adaptations to the machine. Flanges from larger angle iron can be mitre cut with the shear.

Low maintenance               
Moreover, the machines are equipped with centralised pressure lubrication – being one feature of the low maintenance requirements                                                                                                                                                                     

5 Workstations and an extensive range of standard equipment

The universal steelworkers are delivered with an extensive range of standard equipment, such as large heavy-duty tables on the punch-, shear-, and notching station. Easy adjustable hold-downs to enable production in a safe and accurate way are fitted on every station. Free standing on suitable floor, they just need electrical connection to be ready to work.

compactpunchstationpg1107513-1-2.jpg

1)      Punch station
The easy tool change system and swing-away stripper with fast manual adjustment assures a quick setup and is designed for a wide range of punching applications.

compactsectioncuttingstationpg1107512-1-1-2.jpg

2)      Section cutting station
The machines are fitted as standard with blades for cutting round and square bars. 
With extra equipment in this aperture, the machines are able to cut channel, beams or joist, T-section and many other special profiles.

compactanglestationpg110757-1-1-2.jpg

3)      Angle station
Cropping angle iron is possible for every angle between 45° and 90°, both internal and external.

compactflatbarshearstationpg110756-2-2.jpg

4)      Shearing
Specially designed blade approach angle to avoid the necessity to change blade settings when cutting thick or thin material and yet offer minimum distortion cropping.

compactnotchingstationpg1107515-1-1-2.jpg

5)      Notching station
This versatile unit is standard equipped with a rectangular notch unit. The notch table has adjustable back and side stops. Side notch applications are also possible.

Some punch station applications:

pictbdm20140811kingslandwebsitecompact60punchstation-1-2.jpg

Standard Punch end (standard)
Easy tool change system. Overhang position for punching in the flange of I-profiles and U-profiles.
Punching up to 38 mm diameter in the standard execution. Table and stop with guides are fitted as standard.

compactquickchangesystempg1107520-3.jpg

Quick change system
Quick change punch holder (optional)
Quick, fast and accurate punch holder. Available up to 38 mm diameter.

pictbdm20140811kingslandwebsitecompact60largeholeunit-1-2.jpg

Large hole attachment (optional)
Large hole unit for diameters up to 110 mm. Special shapes and applications are also possible.

Some notching & crop station applications:

compactnotchingpg1107514-3.jpg

Rectangular Notching station (standard)
The notching station comes equipped with a rectangular notch unit as standard, complete with table and guides. The unit can be interchanged optionally with a triangular notching unit (available with angle from 22,5° up to 90°).

pictbdm20140811kingslandwebsitecompact60bendingunit-2.jpg

For bending applications (optional)
Maximum capacity is 150 x 10 mm (Compact 50).
Maximum capacity is 150 x 12 mm (Compact 65).
Maximum capacity is 150 x 12 mm (Compact 80).

angleironcutting-1-2.jpg

Angle iron cutting (standard)
Unique ‘Z’ aperture makes it possible to cut angle iron on every angle varying from 45° up to 90°, both internal and external.

channelbeamwebbolster-1-2.jpg

Channel/beam web bolster (optional)
Specially designed bolster for punching in the web of channel or beam.
Bolsters for special profiles on demand.

compactflatbarshearingpg110755-1-2.jpg

Shearing
Specially designed blade approach angle to avoid the necessity to change blade settings when cropping either thick or thin material and yet offer minimum distortion cropping. Shearing the flange of angle iron is also possible.

pictbdm20140811kingslandwebsitecompact60channelpunching2-1-2.jpg

Channel/beam web bolster (optional)
Specially designed bolster for punching in the web of channel or beam.
Bolsters for special profiles on demand.

Questions? Contact us:

Videos


Compact 50 - 65 - 80
Compact 50 - 65 - 80