Weybourne Road, Sheringham,
Norfolk, NR26 8HE, England.
Tel: +44 (0) 1263 822 153
Fax: +44 (0) 1263 825 667
It can be used for punching of plates, flat steel, in the web of channel and on the flange of channel and I-beams. The punching of the web in channel is effected with the flanges up and by using extended length punches.
Easy to operate
The table is delivered complete with servomotor and 2 axis measuring system, and is equipped with an easy to operate K210 control and LCD – screen. A program is made step by step by entering each X and Y value. Optional DNC software can be supplied with the control, so that you can connect it to a PC and save and load as many programs as you want.
The CNC Control System ensures the required accuracy within a hole pattern with several gauge lines. Especially advantageous is the repeatability accuracy when manufacturing repeat batches.
The use of labour intensive manual layout is no longer required and possible operator error is eliminated. The workpiece is pushed to the CNC controlled stop. After punching the stop goes to the next position.